-
Ferno Powerflexx 56 Rescue stretcher w/mattress and straps
$13,520.55POWERFlexx Powered Cot (Catalog ID: PT5600)complete with mattress and straps.
The POWERFlexx lifts and lowers patient loads up to 700 lbs at the push of a button, without lift assistance. The cot lifts the 700 lb. weight, not the operator.
Increase your confidence knowing the cot can handle almost any size of patient while greatly reducing situations where you may injure your back.
PLUS, eliminate the need for battery management with the Integrated Charging System (ICS).
Product Specifications
Length:
Maximum: 83″ (211 cm)
Minimum: 61″ (155 cm)
Width:
24″ (61 cm)
Bed Height Range:
13″- 41″ (33-104 cm)
Max Loading Height:
34″ (84 cm)
Weight:
132 lb. (60 kg)
Lifting Capacity:
700 lb. (318 kg)
Load Limit:
Loading Position: 700 lb. (318 kg)
Lowest Position: 1000 lb. (450 kg)
Power:
24 VDC -
X-Frame Non Magnetic Ferno stretcher 35 X Proflexx
$9,235.90Ferno Proflexx 35 X Xframe – Non magnetic model
-
Proflexx 35 XST StatTrac Stretcher w/Mattress and straps
$6,835.00>X-Frame Cot – 35X PROFlexX® STAT TRAC
Fernos PROFlexX® cot provides superior stability and safety you need when transferring and transporting patients.
-
28 Z Proflexx Stretcher -chair Ferno
$7,205.10PROFlexx Ambulance Cot Kit "Electric Blue", Three Position, Includes Mattress and Restraints. Ferno 28 Z available in rescue red and electric blue
-
PROFlexX X-frame Ambulance cot ” Ferno 35X
$6,260.00X-Frame Cot – 35X PROFlexX®.Rotate Down Side Arms
Fernos PROFlexX® cot provides superior stability and safety you need when transferring and transporting patients.
A longer, fixed front leg in the X-Frame provides minimal flex and a low center of gravity at all heights. This means you may be less likely to flip or tip a cot during transfers and transport, reducing situations that may cause injury to you or your patient.
Length max: 79 inchesLength min: 64 inchesLoading Height: 34 inchesWeight: 92 lbs
Load Limit: 700lbsWidth: 24 inches
-
NonMagnetic Stretcher Ferno 35 ANM mattress/straps
$6,421.99FERNO 35-ANM MR Conditional Mobile Transporter
Includes Model 460 Bolster Mattress, two Model 430 Patient Restraints, and one Model 417-1 Shoulder Harness.
-
Emergency Ferno-Flex® 28 Roll-In Chair w/mattress and straps
$5,901.20Ferno-Flex® Model 28 Roll-In Chair Cot (Catalog ID: PT2801)With mattress and straps. BURGUNDY
The Model 28 Ferno-Flex Roll-In Chair Cot readily converts from a level cot to a contoured chair for maneuvering ease in narrow hallways, elevators, and other confined spaces. Four semi-reclining chair angles allow the patient to be in the most comfortable position. Sectional mattress folds to match the contour of the cot. Two height positions permit patient transfer from hospital beds or the ground.
Complete with mattress an straps.
-
Ferno 93 ES Squad Mate ambulance Cot
$5,307.00The Ferno Model 93-ES Squadmate Ambulance Cot control system has two C-channels for rigidity. This roll-in cot, with a 500-pound (227 kg) load capacity, has the easiest loading capability and the lightest weight in its class.
Includes Model 460 Bolster Mattress, two Model 430 Patient Restraints, and one Model 417-1 Shoulder Harness. Model 360 Mattress may be substituted at no additional charge. Available in burgundy and black mattress.
StatTrac Model is available for use in ambulances with the revolutionary heavy-duty track system installed.
Features:
-
- Swing-down side rails enable convenient patient transfer from bed to cot.
- Four height positions for efficiency and flexibility
- Head-end drop frame and foot-end lead handle for improved EMT control/maneuverability.
- Eight-position adjustable backrest angle from 0 to 75 degrees allows patient to be placed in the most comfortable position during transport.
- Improved lubrication-free, easy-roll wheels allow for greater cot mobility.
- Loading and transport positions for patient comfort and safety
Product Specifications:
Length:
Max: 81″ (205 cm)
Min: 66″ (168 cm)
Width:
22″ (55 cm)
Height:
Max: 32″ (80 cm)
Min: 9″ (23 cm)
Loading:
30″ (77 cm)
Weight:
77 lb. (35 kg)
Load Limit:
500 lb. (227 kg) -
-
Non Magnetic Multilevel emergency cot Ferno 30NM
$5,200.00MultiLevel Liftin Cot, NonMagnetic Burgundy. Includes 460 Mattress and Restraints
Ferno Model 30 Non Magnetic – MRI – Multi-Level Lift-In Cot
-
Ambulance cot Ferno 35 A w/mattress and straps
$4,075.00Ferno 35-A Mobile Transporter complete with mattress and straps (Catalog ID: PT3500)
The Ferno Model 35-A Mobile Transporter, Multi-Level, Roll-In Cot combines the benefits of a multi-level cot with the easy loading of a roll-in style cot. Empty one person load capability for user convenience.
-
-
Ambulance Roll-in-Cot Ferno 26 w/mattress and straps
$3,775.00
Ferno Model 26 Roll-In CotSimplicity is the key to the Ferno Model 26 Two-Level, Roll-In Cot. The Model 26 has only two positions – fully elevated, and ground level. In the elevated position, the cot can be shortened by elevating the backrest and folding down the hinged, head-end frame. Its legs fold up as it is rolled into the ambulance, and unfold as the cot is removed. An automatic locking system secures both the front and rear legs simultaneously as the leg sections unfold. Left-hand and right-hand control levers unlock the front and back legs respectively as the cot is prepared for loading.
Recommended for Type II ambulances or others with a ground-to-floor height of 28" or lower. Also available in a Shock Frame Model 26-S.Features:
Tubular aluminum construction provides durability and strength.
Plastic bearings are provided on rotating components for easy movement.
Automatic locking leg system ensures that the cot legs are locked into place once they are fully unfolded.
Swing-down side rails enable convenient patient transfer from hospital bed to cot.
Adjustable backrest angle from 0 to 75 degrees allows patient to be in most comfortable position possible during transport.
Two stationary and two swivel wheels assist in maneuvering.
Infectious-control, full-length bolster mattress provides comfort and minimizes lateral patient movement.
Model 26 is also available with wheel locksProduct Specifications
Length:
Max: 76" (192 cm)
Min (26): 59" (149 cm)Width:
22" (55 cm)Height:
Max: 32" (80 cm)
Min (26): 10" (24 cm)
Loading (26): 24" (61 cm)Weight:
26: 54 lb. (24 kg)
26-S: 56 lb. (25 kg)Load Limit:
400 lb. (181 kg)
Adjusts to 2 different height levels. -
Stretcher Ferno 26 w/ 2 wheel locks-mattress and straps
$3,595.00Ferno Model 26 Roll-In Cot with 2 wheel locks
Simplicity is the key to the Ferno Model 26 Two-Level, Roll-In Cot. The Model 26 has only two positions – fully elevated, and ground level. In the elevated position, the cot can be shortened by elevating the backrest and folding down the hinged, head-end frame. Its legs fold up as it is rolled into the ambulance, and unfold as the cot is removed. An automatic locking system secures both the front and rear legs simultaneously as the leg sections unfold. Left-hand and right-hand control levers unlock the front and back legs respectively as the cot is prepared for loading.
Recommended for Type II ambulances or others with a ground-to-floor height of 28" or lower. Also available in a Shock Frame Model 26-S.
Two stationary and two swivel wheels assist in maneuvering.
Infectious-control, full-length bolster mattress provides comfort and minimizes lateral patient movement.
Product Specifications:
Length:
Max: 76" (192 cm)
Min (26): 59" (149 cm)
Width:
22" (55 cm)
Height:
Max: 32" (80 cm)
Min (26): 10" (24 cm)
Loading (26): 24" (61 cm)Weight:
26: 54 lb. (24 kg)
26-S: 56 lb. (25 kg)
Load Limit:
400 lb. (181 kg)
Adjusts to 2 different height levels. -
Ferno 24 Multilevel-cot One-man side arms/2 wheels lock
$3,356.90Model 24 Multi-Level Cot, One-Man® Mortuary Cot (Catalog ID: MO2400)
With sidearms and 2 wheel locks.
The Model 24 Multi-Level, Roll-In Style Cot allows one person to perfect retrieval. Special release levers make it possible to raise and lower the cot without assuming the full weight of the cot and body. The load-end legs on the Model 24 unfold and lock automatically when unloading the cot. In confined areas, the Model 24 acts as a highly maneuverable, two wheeled stretcher when the undercarriage is folded and locked. It slides down stairs in this position with built-in stair guides. The multi-level feature allows the body to be moved easily from bed to cot. The cot also allows a portable stretcher to lie evenly in place. The Model 24 Multi-Level, Roll-In Cot comes complete with Ferno Model 372 one-inch burgundy mattress and two Model 430 five-foot-long, two-piece, burgundy quick-release restraining straps.
Features:Multi-level, roll-in style allows one person to perform retrieval.
Special release makes it possible to raise/lower cot without assuming full weight of cot and body.
Load end legs unfold and lock automatically when unloading the cot and fold again when loaded into vehicle.
In confined areas, the Model 24 acts as a highly maneuverable, two-wheeled stretcher when the undercarriage is folded and locked.
Slides down stairs easily with built-in stair guides
Multi-level feature allows the body to be moved easily from bed to cot.
Cot allows a portable stretcher to lie evenly in place.
Comes complete with Ferno Model 372 1, burgundy mattress and two Model 430 , two-piece, burgundy, quick-release restraintsProduct Specifications:
Length: 77″ (196 cm)
Width: 20.5″ (52 cm)Height:
Max: 32.25″ (82 cm)
Min: 9.25″ (24 cm)Weight:
54 lb. (24.5 kg)Load Limit: 400 lb. (182 kg)
-
Ferno First Call Cot, Model 27-1 with sidearms
$3,319.00The Model 27-1 with sidearms. First Call Cot blends classic design with innovative features. All four wheels swivel. The folding end section shortens the cot by 15 inches, and the cot’s head section is tapered, making tight corners less of an obstruction. These features make this cot very manoeuvrable in close quarters and narrow doorways and allow easy access to the body. The multi-level under-carriage provides flexibility in retrieval. The loading-end wheels can be locked when necessary.
Model 27-1 comes with a burgundy, Model 375 one-inch mattress and two Model 430 five-foot-long, two-piece, burgundy, quick-release restraining straps.
Weight: 60 LbsLoad capacity: 400 lbs -
Ferno 24 H Multilevel-cot One-man sidearm/2 wheel lock
$3,240.00Model 24-H High-Floor Mortuary Cot with two wheels locks (Catalog ID: MO2420)
The Model 24 Multi-Level, Roll-In Style Cot allows one person to perfect retrieval. Special release levers make it possible to raise and lower the cot without assuming the full weight of the cot and body. The load-end legs on the Model 24 unfold and lock automatically when unloading the cot. In confined areas, the Model 24 acts as a highly maneuverable, twowheeled stretcher when the undercarriage is folded and locked. It slides down stairs in this position with built-in stair guides.
The multi-level feature allows the body to be moved easily from bed to cot. The cot also allows a portable stretcher to lie evenly in place. The Model 24 Multi-Level, Roll-In Cot comes complete with Ferno Model 372 one-inch burgundy mattress and two Model 430 five-foot-long, two-piece, burgundy quick-release restraining straps.
Features:
Multi-level, roll-in style allows one person to perform retrieval.
Special release makes it possible to raise/lower cot without assuming full weight of cot and body.
Load end legs unfold and lock automatically when unloading the cot and fold again when loaded into vehicle.
In confined areas, the Model 24 acts as a highly-maneuverable, two-wheeled stretcher when the undercarriage is folded and locked.
Slides down stairs easily with built-in stair guides
Multi-level feature allows the body to be moved easily from bed to cot.
Cot allows a portable stretcher to lie evenly in place.
Comes complete with Ferno Model 372 1, burgundy mattress and two Model 430 5", two-piece, burgundy, quick-release restraints.Product Specifications:
Length: 77" (196 cm)
Width: 20.5" (52 cm)
Height: Max: 32.25" (82 cm) Min: 9.25" (24 cm)
Weight: 54 lb. (24.5 kg)
Load Limit: 400 lb. (182 kg)
All items loaded
No more page